Best Print Servers for Security

the complete disk, it worked.as i said before, if you do not have any experience setting up your router, get someone to install this for you, especially if your router was setup with security.

i am already a big fan of linksys and the print server reinforced my opinion.absolutely a breeze to set up, even with 128 bit wep encryption and mac address security enabled on my router.downloaded

cd, installation was relatively easy, the print server detected my printer in just just a few seconds of search and after this, i configure my wpa security to match my wireless network and boom!!!

to install, you do have to hook up temporarily to a wired network to communicate with the print server and tell it what your security scheme is.

also, you will need to suspend the security on your internet router to allow the print server to find it and establish a connection to it.- make sure the printer already works on the computer, with

i had to shut off norton internet security and personal firewall first, and turn them back on after the install and they set rules for the print server automatically.

weaknesses: not really a weakness, but thought i should note it: does not support wpa security in bridge mode.

i found that you need to do plenty of research to find out how to connect it properly.a big item in my case was getting security in the network.

worked right out of the box, just plugged in my printer and included the print server mac address in my router wireless security and i'm in business.

using wep security with windows xp and macos 10.4 on a hp laserjet 2550.

one issue was nortan security later disable my intranet sites and thus i could get to web based admin page.

many folks disable upnp for security reasons.

e-net cable configuration is also possible, if you don't want to turn off security.

i got this print server because all my other wireless networking equipment is linksys and i have implemented wpa security and this print server supports wpa.

it has wep 128 bit security enabled and all pc's can connect to internet and talk to each other properly.

3) in the bi-admin tool, you will be able to choose wpa security and enter your wpa key.

if you have wep or wpa (which you should if you have a wireless network for security) you need to put in the password.

it finds it and then pulls up the security setting page and offers me 5 options, 4 of which are wep enabled and one 'open.' well...i entered my key of 26 chars for 128 encryption and guess what...it