Overhead and market conditions. Mainly overhead, as a store must employ people, have a sales floor, etc. whereas online most of the cost goes strictly to storage.

No, the prices online vary from in-store prices due to market conditions, etc. However, they should honor the price from the website if you bring a print out.

For support information, product manuals and the such you can check out http://www.jazzcameras.com/ which is their official website for support, etc.

I was about to send you over to the support website at http://www.jazzcameras.com/Product_Details/DV-1... to get the manual, but it appears the link for the manual isn't working!

Unfortunately, there isn't a lot of information out there on this camera. The best I can do for you right now is to suggest you e-mail them at Support@JazzCameras.com and let them know the link for the DV-179 manual doesn't work and ask if they can send you one via e-mail.

Ahh the power of the Internet! So many people, so many resources out there. I haven't met a question yet that someone hasn't been able to answer!

So let's tackle your question!

Here are a few resources that I think will provide you with some information to get you started.

Motherboard info: http://www.msicomputer.com/product/p_spec.asp?m...

Motherboard manuals, drivers and BIOS updates: http://global.msi.com.tw/index.php?func=downloa...

A REALLY, REALLY good thread about this motherboard with a lot of people talking about it: http://forums.anandtech.com/messageview.aspx?ca...

Let me know if this helps or if you need more information!

Insignia is Best Buy's house brand, and different models are shipped out to different manufacturers. The nearest I can find -- and I can't confirm this 100% -- is Coby is the manufacturer for the NSLCD37.

In order to record two channels (view one channel, then record the other) the DVR must support two inputs from your satellite, cable or other provider. Unlike the old analog signals, digital signals cannot be "split" so you must provide for two separate inputs. Your television doesn't really play into the picture as it will be handling the signal it is being fed and is not worried about recording.

In a nutshell, when purchasing a DVR recorder make sure it supports more than one input and provides more than one output (for multiple devices). Or, to reduce your clutter, consider getting a DVR directly from your cable or satellite provider which already has this functionality built in.

All-in-one printers seem to be a popular topic here this week :)

I recommend the Brother MFC-440CN. As I've said before, one of the best features about this guy is that it comes with built-in Ethernet networking. Great for when you want to share your fax/scanner/printer with the whole house.

The only drawback to this model is that it uses inkjet carts. However, they are relatively inexpensive (about $11) and last a long time. I've had mine for months and couldn't be happier.

Are you sure about the model number? Navatlas doesn't have a Xnav3 listed in their products, either current or discontinued? The most popular model of the Xnav is the Xnav3550 -- and here is a link to the manual for that: http://www.dualav.com/i/product/manual/xnav3550...

If that isn't the correct model, just reply back with the right model number and we can go from there.

Actually, I think you can get away with spending far les than $200+. The one I use and absolutely love is the Brother MFC-440CN. It's an all-in-one that has built in networking, which is great for today's connected homes. The only drawback to it is that it is an inkjet printer, but the ink carts are separate and relatively cheap -- about $11 each.

It's a lot of printer for the price, and Brother has always made some rather nice, long-lasting products. In fact, this is my 3rd Brother printer! I have two laser printers and now this one and they all have exceeded my expectations.

JVC = Junk Value Circuitry

I will never own another JVC product. I've found that they are one of the worst when it comes to reliability. My JVC camcorder konked out on me the day after the warranty ended!

Stick with Phillips.

I would highly recommend sticking with the iPod or Zune. The cheap MP3 players on the market just don't work well with many music services. Apple recently lowered the price of their iPod Shuffle to $49, and it is just as good as the fancier models. It's simple, compact and easy to use -- and no screen to worry about breaking!

Would you like the good news or the bad news?

The good news is that no matter what model you chose, you will get about the same efficiency.

The bad news is the same! Unfortunately, there is really not a big difference between the energy consumption of dryers. Most all electric dryers are going to use the same amount of energy to get your clothes dry.

The most efficient dryer out there is still the clothesline!

Stick with at least a Pentium D (dual core) or higher. Today's applications are being designed around the dual core chips (where they get two processors on a single chip) and you will appreciate the speed difference.

I don't recommend Celeron because they just aren't that cheap compared to what you get anymore.

What is the model of the HP? They still have many of their drivers online for PC's made fromm 1995 on.

If they are wireless, they will be digital. For true sound clarity and replication, you have to go with analog. However, for most intents and purposes digital will suit most peoples needs just fine.

Vizio is a store brand television that is made generally for warehouse clubs and other discount stores. The quality of Vizio tends to be related to where you bought it from -- though overall quality isn't bad. Generally, you want to make sure that any flat panel you buy doesn't suffer from "fast action blurr" or the inability to disinguish greys and blacks correctly. Two common problem the lower end LCD flat panels have.

You can find the manual, as well as updated drivers, at Microsoft's web site (http://www.microsoft.com/hardware/digitalcommun...). The VX3000 is a good camera, and I used it myself for a while. The only thing I don't like about it is that it isn't too good in very low light.

Good luck!

As long as it is a dual core system (Intel Duo or Pentium D) and has at least 1GB of RAM (more is always better) and a 250GB hard drive you should be all set!

I would recommend sticking with Windows XP if you can, but a lot of newer systems come with Vista. If you are going to go with Vista, dump the basic version and invest in the home version.

Crockpots just aren't made the way they used to be. They are easier to clean and more portable, but for true slow cooking the lightweight models of today just send the heat through the food way too fast.

Having said that, I have a Rival 3.5 Quart cooker that is built pretty solid and does a good job of not burning the food on the bottom. You may also want to think about investing in some crockpot liners as well to help keep the food off the bottom directly -- helps with cleanup and helps with foods that tend to like to stick.

It depends on the outdoor activities. As long as it doesn't involve a lot of water you should be fine. Most digital cameras nowadays can stand the roughness of carrying them around and such. The one thing you want to avoid though is keeping it in direct sunlight or high heat.

I'd invest in a good, small camera bag that he can carry with the camera in it. Not only will it help protect it, but will also help him keep track of it and clip it to his backpack or other gear when in the great outdoors.

You can get one directly from the manufacturer for about $10 or so. Check out their online parts store and happy cooking!

http://www.jardenstore.com/products.aspx?pgsz=9...

I am not seeing any home charger for the NExtar 3.5, but plenty of DC (auto) chargers. What you can do is purchase one of the DC chargers and then buy a DC to AC convertor (most office supply stores and Radio Shack will have them). They run about $30, but have a world of uses.

That is definitely not normal for a LCD television.

I don't think its the power supply, it sounds like the LCD is not getting the correct signal at startup and doesn't know which line of pixels to illuminate. I would think that this problem is going to get worse instead of better, unfortunately.

Is it still under warranty? If so, I'd return it or get a service call in before it expires. These things are expensive to fix!

It's really going to depend on what platform you are using -- Mac or Windows. For Windows I'd recommend Roxio Easy Media Creator if you are an absolute beginniner. It's powerful, but easy enough to learn. For the Mac, the iLife package provides an excellent video editing title that is easy enough for just about anyone to get the hang of.

On many cars made in the last 5-6 years you will notice in the backseats special hooks that are designed for child seats. The straps on the Zooper utlize these hooks instead of using the traditional bar that hooks into the seatbelt system. It's 100% safe and provides much more stability than the old way did.

Hope this helps!

On many cars made in the last 5-6 years you will notice in the backseats special hooks that are designed for child seats. The straps on the Zooper utlize these hooks instead of using the traditional bar that hooks into the seatbelt system. It's 100% safe and provides much more stability than the old way did.

Hope this helps!

Are you looking for the schematics of the radio itself, or just how to hook up the wires in the car? If you are looking for the later then you can find the manuals in PDF format over on Sirius's site at http://www.sirius.com

If you are looking for the schematics, those might not be publicly available because of patents, etc.

The Nokia N95 will work on just about every cell network in the world. It even includes a built-in GPS system to help you find your way when you are traveling abroad.

It's a little pricey, unfortunately, but considering how many different bands it operates on that can be expected somewhat.

If you are looking for unlocked, you may want to check out eBay.

I would highly suggest you call your local Sears (or 1-800-4MYHOME) and see if they have Kenmore furnance installers in your area. You will pay more upfront, but they are backed by an excellent warranty and will provide years of maintenance free worry. Best of all, for what little maintenance is needed, Sears sends someone out each year to take care of it for you.

You get what you pay for!

Doesn't it seem like nothing nowadays is simple? It's amazing how complicated they make things!

Personally, I think for what you want you can save a lot of money and buy a personal boombox instead of a CD player component. The Sony CFD-350 (http://wize.com/boomboxes/sony-cfd-s350-radio-c...) is a good choice and comes highly recommended.

'Tis true, 'tis true!

High MP digital SLR cameras lose their sharpness at a distance because of the complexity taking place. Usually landscape photographs require the shutter to stay open longer and require a telescoping lens. Both of these introduce most instability (i.e., shake) into the camera. Some of this can be corrected for, but some of it cannot.

If you are mainly going to be taking landscape photographs you are much better off sticking with a regular digital camera. You'll get pictures that are every bit as good, if not better, than an SLR at a fraction of the cost.

There should be a stitch length knob on the machine. You can refer to the online manual and other tips about the 998B at the manufacturer's website -- http://www.euro-pro.com/europro/faqdetail.aspx?...

It sounds as if your backlight might be broken. You may want to perform a reset of the device to clear any screen settings to see if that helps.

It's available and has great reviews out on it. You can check it out over on Newegg.com where they have it for less than $100 -- http://www.newegg.com/Product/Product.aspx?Item...

I highly recommend newegg.com -- they have terrific customer service and they ship very quickly. http://www.newegg.com/Product/Product.aspx?Item...

Enjoy!

"You have to try this vaccuum -- it really sucks!" ;-)

For pet hair, I would recommend that you always stick with a bagged vaccuum. Luckily, the Electrolux is one that uses a bag and is quite powerful. You may want to look more at the hose diameter and amps the vacuum puts out. Anything below 2" in diameter for the hose will get clogged way too easily with pet hair.

Good luck and I hope this helps you make a more informed decision!

What type of machine -- who is the manufacturer?

Iron Rite was very popular in the 40s and 50s, but unfortunately like so many other classic American companies has went into the history books. Your best bet for finding Iron Rite irons is eBay (http://search.ebay.com/ironrite).

There are a number of collector clubs out there as well, and they may be able to point you to parts and such. One such fan base is http://www.irons.com/ironrite.htm which also has a classifieds section that may be of interest!

The standard wash cycle is 30 minutes, but there is also a 20 minute and 40 minute cycle available as well.

Hope this helps!

It's actually quite easy! Find the podcast in the iTunes section, or go to the website of your favorite radio station and download the feed from there.

Once you get it into iTunes you can either load it onto your iPod or you can play it directly from your computer.

Please note that not all shows are available via iTunes -- only those which the radio stations have agreed to put out there.

I personally recommend the AMD over the Intel line of chips for several reasons:

• Price. Generally the AMD chips are about 10-25% cheaper.
• Performance. They are every bit as good, if not slightly better, than Intel.
• Compatibility.

If you are building your own machine, then I would suggest going with a 64-bit AMD chip to be prepared for the future. Make sure you have a good power supply and fan, as the AMD's do run a bit hotter than Intel.

With an LCD you should always run at the resolution specified by the manufacturer to get the best results. For 906BW supports a resolution of 1440 x 900. As long as your video card supports that you are good to go!

The beauty of Linux is that you can run it on just about anything -- as long as you can find supported drivers for the chipsets (network, video, disk, etc.). I remember my first Linux install was on an old 286-based Tandy system -- worked just fine!

Nowadays, if the laptop is commercially available you can bet some distribution of Linux will come out supporting it. However, you want a laptop that is going to last no matter what OS you put on it.

I'm a big fan of Dell and Sony. Lenova makes some good laptops too, but I am not a big of a fan of them since the quality seems to have went downhill after they bought out IBM's Thinkpad line. Two of my favorites are listed below.

Good luck no matter what OS you ultimately run!

The "A" refers to the fact that the display is adjustable. You will find that all current models of the CS-2850 have adjustable displays. So CS-2850 and CS-2850A are referring to the same calculator.

From what you describe, I think you can find a good, quality laptop for under $900. Basically, make sure you get something that has at least 1GB of RAM and preferrably running Windows XP instead of Vista.

I've listed two below you might want to check into. Keep in mind if you go the Dell route that usually the best deals are found by going through their "Small Business" Section of the website.

You can't go wrong with th

Yes there are! Check first with your local community college or adult continuing education center -- they often offer classes on digital photography and other computer topics.

Second, inquire at the library. They often know of tons of local resources and classes that are free and help you get to know others in your community who are also into photography.

Finally, ask at the store where you bought it. Often times most retailers hold training sessions in the evenings for new owners of electronic equipment.

Good luck and happy photo taking!

Insignia is what is refered to as a "Store brand" -- it is manufactured to be a budget LCD that doesn't have all tha latest and greatest features. With the cost of LCD's, and the technology changing so rapidly, I'd really suggest looking at a brand name like Sony or Panasonic. The last thing you want is to spend a lot of money and get an inferior picture.

Just my two cents!

One thing to keep in mind with the barcode readers is that you can use them without any software at all. Just open up Excel or Notepad, scan a barcode, and it should dump the numbers right into the file.

So your possibilities are pretty far and wide. For the budget conscious, they are a number of opensource products on the market (check out http://www.sourceforge.net ).

If you look at just raw MIPS, the Intel Core 2 Duo 5450 is going to be the winner (faster). Now, having said that let me say that for what you want to do -- surf the internet and work with digital photos -- I would recommend you go with the AMD. It is going to be cheaper and quite frankly the premium price you pay for the Intel chip is going to be money spent for power you don't need.

I have used for about 3 years and highly recommend Computer Associates Anti-Virus product ( http://wize.com/utilities/computer-associates-a... ).

It's very low-impact on the system. By this I mean I have not noticed a big slowdown when it is doing its realtime scan. The price is also well within most budgets and they come out with frequent updates.

If you don't go with CA, the only one I definitely DO NOT RECOMMEND is Symantec. Symantec products are notorious for slowing your system to a crawl and being impossible to every uninstall!

Yes, this camera is fully compatible with Macintosh. You will need a program that can play and decode DVD's, but if you have iLife that will work just fine.

The good news about most electronics, especially camcorders and digital cameras, is the graphics and video format has been pretty much been standardized so you don't have to worry about compatibility problems as you move to different platforms.

Good luck and enjoy your camera!

Mailmate is Staples brand of shredders and they are pretty good. They also handle shredding of credit cards, paper clips, floppy disks and CD's. So you get quite a bit of bang for your buck there.

I believe Mailmate is actually manufactured by Fellowes, so they come from a pretty good company.

As long as you keep the shredder blades oiled, and don't exceed the capacity rating of the unit, you should be able to enjoy years of life out of any shredder. Get a bottle of mineral oil and oil those blades once every few weeks and you will be fine.

I recommend a course in business ethics, personally.

Hmmmm... something tells me to just keep my words to myself on this one :-)

I would suggest a very big wood chipper :-) But you might want to check out eBay if you are looking for some good deals on commercial equipment such as that. Good luck.

No, there is on consumer shredder on the market that can shred metals such as that. Since these are paint cans, you will most likely need to contact a hazardous material recycling provider in your area to assist in the disposal. You can't just throw those away!

I feel your pain! Consumer debt is reaching all time highs in this country. To help "alleviate some of that pain" and to stop the madness, check out the Fellowes P-40 which will do a great job of making nice plastic pieces out of those credit cards! Read more about it at http://wize.com/shredders/fellowes-p-40-shredde...

The Fellowes P-40 delivers economical performance in a strip-cut shredder ( http://wize.com/shredders/fellowes-p-40-shredde... ) though I would recommend you avoid strip-cut shredders if at all possible -- it is too easy to put together documents that have only been strip-cut.

There are a number of good, cheap shredders on the market that will get the job done. The most important thing to remember when buying a shredder is you want a cross-cut or confetti-cut shredder. Avoid the single-strip shredders as they make it too easy for would-be thieves to put the documents back together.

Having said that, check out the Fellowes Confetti 5 shredder -- it should fit the bill nicely! http://wize.com/shredders/fellowes-shredder-con...

Actually, here is something that the stores won't tell you. Get yourself a bottle of mineral oil (about $3 for a large bottle at any drugstore) and use it! It's the exact same stuff they use in the shredder oils at a fraction of the price.

Even better, you can use it for all your gadgets that have blades in them to sharpen them up. Hair trimmers, beard trimmers, etc!

For the price, typically below $70, you can't go wrong with the Fellowes Confetti 5. It is designed for household use and can make small work out of taking care of those important papers you don't want others to see. Check it out at http://wize.com/shredders/fellowes-shredder-con...

My first suggestion is to check your local Yellow Pages to see if you have a store such as Batteries Plus or the like in your area. They often have great deals on batteries and can help make sure you get the right one for your camera.

Aside from that, you can also check out Amazon (http://www.amazon.com ) and eBay (http://www.ebay.com ) for a wide selection of batteries. Just be sure you know your EXACT model number to get the right battery!

Absolutely! Camcorders have a lot of sensitive electronics inside them. It only takes one "drop" of the camera to screw things up -- especially the optics. I'd run away from this camcorder that needs "work" and instead set your budget and then find a quality camcorder that you can afford. Wize helps you search for camcorders based on price, features and more. Let it help you make an informed, WIZE decision!

Just like any other purchase, you have to know what you are buying before you commit. I'm always skeptical about buying used electronics, especially camcorders, because of the delicate electronics within. It only takes one "drop" of the camcorder to really throw things off. I know this because I've done it myself!

My advice is to set your budget, then find a quality camcorder (new) that fits in your budget.

Right here, of course! Wize has an extensive list of camcorders you can browse at http://wize.com/digital-camcorders/ . Once you find one that you think might fit your needs you can actually view the prices from different retailers by clicking on the prices tab. For example, check out this price list on a Canon DC50 DVD camcorder -- http://wize.com/digital-camcorders/canon-dc50-d...

There are always deals that can be found -- just depends on how hard you want to look! The good thing about Wize is that you can let it do the deal finding for you. For example, take a look at the camcorder category on Wize located at http://wize.com/digital-camcorders/ . You are going to see a lot of Camcorders with a lot of featurs. You can narrow down the selection by features you want and then search for the best price.

One stop shopping!

Not quite sure what you mean by art -- I take it you want to get good quality imags of things you have designed or made. If this is the case then your best quality is going to come from a camcorder that records in digital format (MiniDV, HDD, etc.) and if you can afford it one that supports high definition recording.

Sony makes the Handycam HDR-UX7 which is a great camcorder for the price that might be just what you are looking for. Check it out at http://wize.com/digital-camcorders/sony-handyca...

I can't say enough good thing about the Sima Universal Camcorder LED Light. I've owned one for two years and it delivers great light without the harshness. It uses two different colors of LEDs to give you a natural tone to your light instead of the harsh white lighting some can give.

It's rechargeable, and the charges can literally last for months! It's using LED's so you are talking about very little power draw.

You can read more about it over at Amazon -- http://www.amazon.com/Sima-SL-10LX-Universal-Ca...

Go with the MiniDV format. The reason being is you will be going to a pure digital format versus the analog format of the traditional camcorder. The benefits are a much crisper picture, no loss do to signal "fade" and the ability to pull the video directly to your computer.

You can still find a few Digital-8 camcorders on the shelves, but realize this is a dying technology. Today, I'd recommend going with MiniDV or HDD cameras. If you can swing it, spend a few more bucks and go with a high definition camcorder at the same time.

If you do want to stick with Digital-8 format, Sony makes two cameras you might want to investigate further:

• http://wize.com/digital-camcorders/sony-handyca...
• http://wize.com/digital-camcorders/sony-handyca...

It's a little on the expensive side, but if you can wing it I'd recommend checking out the Sony HDR-SR1. It comes with a 30GB HDD, plus it can record directly to a Sony Memory Stick Pro. You are going to get great HD resolution which will come out clear and sharp on your HDTV or computer.

You can read more about it at http://wize.com/digital-camcorders/sony-hdr-sr1...

Happy videoing!

If you have a local battery store in your area (Batteries Plus, etc) then I have found they often have excellent prices on batteries for camcorders or anything else you can think of! Plus, they will recycle your old battery for free.

Apart from a local source such as that, http://www.amazon.com and http://www.ebay.com are your two best sources. I'd recommend Amazon first for name-brand batteries and eBay if you are OK with off-brand.

I always recommend sticking with Sony for camcorders. The quality is second to none. I've used JVC in the past and have not been impressed. Having said that, I think the best bang for the buck right now is the Sony Handycam HDR-UX7. You are going to get amazing picture quality at a price that won't break the bank. Check it out at http://wize.com/digital-camcorders/sony-handyca...

Truth be told, almost any paper shredder can handle the job. The things to look for in a quality shredder are:

• Cross-cut or confetti cut. Avoid strip cut.
• Ability to handle at least 5 pages of paper at a time.
• Ability to handle staples and paperclips
• Attached wastebasket for quick clean-up

Also, be sure to oil the blades at least once a month. This will ensure a long, productive life for your paper shredder.

The Fellowes Powershred PS-62C (http://wize.com/shredders/fellowes-powershred-p...) is a good cross-cut shredder that has a wide opening for a variety of documents as well as a generous waste basket. I particularly like the way the waste basket slides in and out. It's low profile design let's it fit in just about anywhere.

Hear ye, hear ye! I have asked the king of papercut land and he has declared that every citizen should own a paper shredder!

Paper shredders should be a fixture in every house nowadays. Make sure you get one that does confetti-cut shreddering and not just strip shredding. Then make it a habit of making sure all of your old papers, mail and documents go into the shredder first before hitting the recycle bin!

For Camcorders, stick with Sony. I've used JVC and went back to a Sony even though they cost a bit more. You get what you pay for.

The SOny HDR-SR1 is your best bet right now for a camcorder that records to a hard drive (http://wize.com/digital-camcorders/sony-hdr-sr1...). At 30GB, that should be enough for up to 2 hours of high definition video.

Right now the best bet for a Sony HDD camcorder is the Sony HDR-SR1 (http://wize.com/digital-camcorders/sony-hdr-sr1...) which comes with a 30GB drive. The good news is this is also a high definition camcorder, with the bad news being that HD video takes up a lot of space!

You might want to also look at a few of the solid-state cameras coming onto the market that record directly onto removable flash memory. They are probably going to be squeezing the HDD camcorders out of the market very soon.

The DP 781 does come with one audio-video input. If your camera comes with an AV jack, this is probably the best bet for watching it on the DVD player without burning it to a DVD first. However, I'm not even sure that would work -- worth trying though.

If you never want to see that camera again, go ahead!

The fact of the matter is, unless you have invested thousands of dollars in a high end SLR camera, when you digital camera breaks and isn't under the manufacturers warranty anymore you should just pitch it (recycle) and get another.

Technology changes so quickly and a lot of times they just don't repair stuff anymore. You might get lucky and get a refurbished one back if the camera is still being sold in the stores.

Stay away from the extended warranties and if your camera breaks, consider it an omen to get a new one with better technology.

In 2005, Sony was promising a $20,0000 57" LCD, but it never materialized. I think they are still waiting for the prices to come down for components as well as judging market demand.

The "next generation" LCDs will be made of organic crystals, which will represent some pretty impressive power savings. I think a lot of the manufacturers are working with that technology when developing some of the larger screen sizes.

At CES 2008 they had a few notable offerings in the LCD and HDTV market. You can read more about what they were showing off at http://www.cesweb.org/attendees/markets/theater...

Absolutely not!

They will be better!

miniDV digital is so much better than the old analog tapes it is hard to know where to begin. For starters, the picture is much more crisp and clear thanks to enhanced resolution. Second, the audio quality is going to be in stereo and sound so much better. Finally, the quality of making copies of the miniDV tape does not degrade as you make more -- after all, it is just a bunch of 1's and 0's.

You are going to love the digital miniDV camcorders. They are light years ahead of the old camcorders that recorded to standard tape.

Any digital camcorder will work equally well with any OS that can support it. Mac has an advantage here because of the great video editing packages that are out there available for the OS.

Make sure whatever camcorder you buy has a Firewire port for connecting -- some of the lower end models just have USB.

If your budget allows it, consider going with a solid-state digital camcorder so you can store your movies on removable memory to make transferring them to your computer a snap.

Canon MP610 (http://wize.com/printers/canon-mp610-photo-all-...) is not only a great photo printer, but also a great all-in-one machine as well. It's got a good print speed, low cost for the consumables (ink) and very high quality photo output.

Though I tend to be an HP fan, I do like the Xerox Phaser 7400DN (http://wize.com/printers/xerox-phaser-7400dn-la...) for commercial use. It's got built-in duplexing and is ready to hook up to your network.

It's expensive, and the toner isn't cheap, but Xerox is known for their high quality output. I've used a Phaser before and I can tell you the clarity and crispness of the output from the Xerox models is some of the best you will find without going to a sub-dye printer system ($$$$$$).

Though I am not a fan of Epson, if you are committed to buying that brand the Epson C11C623001 Photo Printer may be just what she needs (http://wize.com/printers/epson-c11c623001-photo...). It's a nice, compact photo printer that is easy to use and has a relatively inexpensive inkjet cartridge system. For a teenager, its handy because it is designed specifically for photos -- single purpose, so takes away a lot of the guesswork with loading paper, etc.

Well, of course every manufacturer is going to say their product is the best thing since sliced bread. Your best bet is to find out what the actual users of the product are saying. Sites like Wize (right here!) are good. Just find the model number of the printer and do a search for it here on Wize.

For example, the HP 3052 has its own page on Wize with information from users across a number of different sites. You can check it out at http://wize.com/printers/hewlett-packard-laserj....

Good luck!

Keep in mind that Zebra printers are designed for commercial users who are printing high volumes of labels, barcodes, etc. However, if this fits your profile then I'd suggest going with the Zebra 203DPI (http://wize.com/printers/zebra-203dpi-peel-rew-...). It's a monster of a printer, but it will fly -- capable of producing up to 60 barcodes per minute (that is one per second!)

I may sound like a broken record here, but you just can't beat the HP 3052 (http://wize.com/printers/hewlett-packard-laserj...) even though it costs a few bucks. It's a laser multi-function that includes copying, faxing, scanning and (of course) printing. The thing is built like a tank and will give you years of faithful service.

The toner tends to be a bit on the high side, but you will get a good 3000-4000 page yield out of it. Shop around on eBay for better deals on the toner than buying it at your office supply store.

If you have the cash, the HP 3052 is my choice for an excellent laser all-in-one (http://wize.com/printers/hewlett-packard-laserj...). I highly recommend going with laser over inkjet because the cost per page is lower and laser printers tend to have a longer lifespan than inkjet. Not to mention they have a faster print speed as well.

HP makes a great line of printers, and the 3052 won't dissapoint.

Lexmark was a spin-off from IBM about 10 years ago. At one time Lexmark stood for quality -- the kind of quality IBM was known for. Today, well, let's just say they are more known for the cheap